Name Board with Crackle Effect and Welcome Board with Distressed Finish by Vidhu Thareja
  • /
  • 782 Views
  • /

Hi Everyone.

I hope all of you are doing great. This is Vidhu Thareja once again back on the blog of Connect4Sale with a new project inspiration. I would like to thank team of Connect4Sale for giving me another opportunity. This time I am sharing ideas of creating décor for the exterior wall of your home. I have step wise picture tutorial for all of you. So without wasting further time, let’s start the projects…..

My first project is a Name Board. I have received plain MDF board, measuring 14 x 4 inches. Connect4Sale has recently introduced mdf boards in different sizes.


Next step is to choose a tissue for the project. Composition plays a very important role in Decoupage so always select a tissue, which will go very well with the base. First I have primed the base with two coats of gesso. After that I have done color blending with two colors of chalk paint using sponge. You can use single color also. Here I forget to click picture. Always choose colors, which will perfectly match the colors in tissue.

Here I have used pink and green shades of chalk paint. I leave it to dry. I do not want to do decoupage on the whole board so decided to use one step crackle medium. Apply dark color first and on top of that apply one step crackle medium with synthetic Bristol brush. Use dab method while applying crackle medium. Let it dry naturally on its own. Do not speed dry. It dries clear. Then apply any contrasting shade of chalk paint with brush. As soon as the colour starts drying, you will get to see beautiful cracks forming up. Here you can see beautiful cracks and dark shades of chalk paint can be seen through the cracks.

Decoupage has been done on top of the crackle effect. So here we need to use lighter print tissue so that cracks can be seen through the print. Remove the image and edges using wet brush technique and separate the plain layers and printed layers and adhere the tissue using Mod Podge. Do not apply too much of Mod Podge. Excessive Mod Podge could tear the tissue. Let it dry for atleast one hour or so and then seal the decoupaged area with Mod Podge. After one day seal the project with two coats of water based varnish. Two coats of varnish is more than sufficient. Give enough drying time in between the each coat of varnish. Top coat would be of resin. Stick the names with any strong glue and pour resin. Resin will make your name board water resistant. Resin is also available at Connect4Sale. A beautiful Name Board is ready to adorn the exterior wall of your home.

My next project is Welcome Board with Distressing. I have received another board measuring 14 x 6 inches in my Guest DT kit. Prime the base with two coats of white chalk paint and select tissue. Whenever we want to give old weathered or vintage look to any project, we use distressing technique. For that we need to use chalk paint only because acrylic color starts chipping off with sanding. Firstly I have created three palletes in three different colors of chalk paint, dividing the space in three equal portions. Apply two coats of chalk paint and let it dry completely.

Now rub candle wax on that area where you want to have distressed look. On top of that, I have applied two coats of white chalk paint because I was planning to use tissue on my project. You can use three different colors, if you are using paper or want to do some stenciling. Using a sand paper of 100 number rub down the paint where candle wax was rubbed earlier so that paint rips off giving it a beautiful distressed look.

Now you can see the distressed look and shades of colors which has merged so well giving it a vintage and weathered look. Dilute black chalk paint and using a zero number round brush, draw pallete lines and adhere the napkin using Mod Podge. Wide range of chalk paint and Mod Podge is available at Coneect4Sale.

As I have always said, use wet brush technique to remove image and edges from the tissue. Let it dry and then again seal the image with modpodge. Now its time to do some stenciling. Since it is going to be used as welcome board so I thought of using the stencil related to that which I have received in my Guest DT kit. Connect4Sale has a beautiful collection of stencils. I wanted to give a little dimension to stenciling part so instead of doing stenciling with color, I have mixed chalk paint in modelling paste and applied it through stencil with pallete knife.

Let it dry comletely and seal the project with clear varnish. Two coats of varnish is more than enough. If you wish, you can pour resin to make it water resistant. A beautiful Welcome Board is ready to adorn the wall of your home. I hope you will find these tutorial inspirational.

All the craft supplies, used in these projects are available at Connect4Sale. Do check the website. Grab your supplies and create somethig beautiful for your home or gifting to your loved ones. Do not forget to share your awesome creations with all of us.
Happy Crafting
Vidhu Thareja

About The Artist

Vidhu Thareja is a crafter from Noida, born and brought up in Delh. She had completed her studies from Delhi. She began her career as a freelance translator and worked with many reputed publications. She has also worked in the Insurance Sector for many years.

Due to personal reasons she had to give up her job, which actually turned out to be a blessing in disguise. The turning poing came when she got the golden opportunity to work with Madura Coats Pvt. Ltd. as a Craft Consultant for their Anchor Thread Craft activities in reputed schools of Delhi/ NCR Region. Although it was not a very high paying job it gave her all the confidence and a feeling of fulfillment, which made her realize the crafter hidden in her.

Since her childhood she was very much interested in crafts. Growing up, there was not that much exposure to tv or computer and she used to do embroidery in her free time or during vacations. Her biggest inspiration was her mother who is her motivating force. At the time of conducting Anchor thread craft workshops, she started doing DIY activities and decided to learn more.

From then there was no looking back and today she is doing what she loves to do. Although every new technique and art form attracts her but Decoupage and Sospeso are the two crafts, that she enjoys the most. She never lost a chance to learn anything new because she believes that learning never stops.

She follows her fellow crafters because she feels every person teaches you something. To all upcoming crafters she has this to say “That whatever you do, do it with love and passion, follow others but make your own style statement. Be confident but never be over-confident. Share your knowledge, that is what makes you grow”.

You can follow Vidhu Thareja on her Facebook and Instagram on the below mentioned links…

Vidhu’s Crafts – Making Crafts From Heart

//www.instagram.com/vidhus_craft_noida


//www.facebook.com/Vidhus-Crafts-Making-Crafts-From-Heart-553637291368517/




Continue reading...
Mixed Media On Metal Buckets by Semonti Roy
  • /
  • 374 Views
  • /

Little about my project:
Hello ctafty peeps it’s me Semonti again on connect4sale blog. Today I am going to share my last guest design post. For that I altered a metal bucket which I got from the store. I have also got some other beautiful stuff in my kit. Flowers, Blue Spray Color, Red Chroma Burst Pigment Powder, red micro beads, some mdf leaves cutouts and very varsetile awesome Immix Glue Art Medium Matte. Used the rest of the supplies from my stash.
Thank you once again to Deepa ma’am and entire Connect4Sale team for sending me these wonderful stuff and getting me spoiled.


Now jump into my project. First sanded lightly my base then applied Grey Chalk paint all over my base. Applied texture paste through Mandala stencil in front of my base. Also used star stencil and snow paste on my base for more texture. Sprayed the blue colour on mandala design to get the desired look. Applied some blue metallic paint for giving shiny look to it. I made a clay mould for my focal point. Coloured it with same blue spray and metallic paint. Added a piece of gauze and some sisal fibre in front of my base.

Added one painted MDF leaf cut out on it. Then added my fairy face mould on the leaf. Cut butterfly wings into two parts and added the wings on both side of my fairy. I have coloured two pink roses with Red Chroma Burst Pigment Powder to turn them into red. Added some other flowers, pollens, leaf die cuts, red, gold and blue micro beads, glitters and stamped and fussy cut leaves to embellish my project.

Also added some stars made out of clay for more 3D look onto my project. Applied some blue and gold wax on fairy, stars and on my base for shinier look. For more wintery look and feel I added some snow paste here and there on my project. Added some white and red splatter to complete my project.


Hope you like my project. Thank you for your time and happy crafting.
Semonti

About The Artist

Semonti Roy is from Howrah, Kolkata, West-Bengal. She grew up in the small historical town of Serampore. She has completed her graduation and Diploma in Multimedia. Since childhood, she loved to do artwork and made various types of handmade décor pieces to decorate her home. For the past 6 years, she became very interested and passionate about crafting. Her hobby turned into her career.

She loves to do different types of craft projects like mixed media, altered art, decoupage, card making, art journaling, scrapbook layout etc and is always eager to learn new things. Crafting is stress buster for her. Semonti says “I can express my emotions through my crafting. I am inspired from many things in nature and different things surrounding me which affects my mind and heart. I like to combine different craft styles, but my all time favourite is Decoupage and Mixed Media”.

To know more about her work, please visit the following links below

Blog //semontis.blogspot.com
Facebook //www.facebook.com/creative.creation5268
Instagram //instagram.com/semontiroy
Pinterest //in.pinterest.com/semontiroy3
Twitter //twitter.com/semontiroy1
TouTube //www.youtube.com/channel/UCpPSlx_Q5LB5x9Xh3EPA6

Continue reading...
Decoupage On Galvanized Metal Buckets By Vidhu Thareja
  • /
  • 643 Views
  • /

Hi everyone, Vidhu Thareja here once again with another tutorial for this month. I hope all of you are having a great crafting time. Summers and rains means to me, staying indoors most of the time and crafting is the best way for me to kill time and to beat the heat. It keeps me energetic.

I would like to thank once again Connect4Sale for giving me this golden opportunity of Guest DT. Today I am sharing step wise tutorial of altered Galvanized Metal Buckets, recently introduced by Connect4Sale. These buckets can be turned into home décor piece or outdoor décor piece using decoupage, mixed media. These buckets can be used to place indoor plants, as ice buckets, as cutlery holder or can be hanged in balcony, possibilities are endless.

I personally love doing decoupage and when I received two such buckets in my Guest DT kit, I decided to alter them using decoupage technique. Vintage never goes out of fashion so I have decided to give vintage look to one bucket. So lets start our projects.

On my first bucket I have used a beautiful tissue from my stash which I have bought from Connect4Sale. Tissues are my weakness and I love the collection of tissues, available at Connect4Sale. First step is to create a base on bucket. Always clean your base like metal, glass with rubbing alcohol to make the base free from any dust particle. As we need white base for decoupage, I have applied one coat of gesso with sponge dauber to avoid brush stroke and to achieve uniform finish. I let it dry and then I apply one coat of Folk Art White chalk paint. Always create a base with white chalk paint or gesso, before doing decoupage with tissue. White base enhances the beauty of tissue, no matter what is the base color of the tissue.

Then I have sanded the surface with fine sand paper. Now it is turn to decoupage the tissue. I wanted to use only image from the tissue, so I have used wet brush technique to remove image from the entire tissue. I have used the image on two sides of the bucket. First I see the placement of the image on bucket. This is very important step for decoupage. Then I have removed the top printed layer from rest of the plain layers. I have used Mod Podge Matte to adhere the tissue. Use minimum glue, when you are using tissue for decoupage because tissues are very thin and delicate and excessive glue will form wrinkles. I place image and while holding it with another hand I apply very little Mod Podge on a small portion. I paste tissue and smooth the tissue gently with hand. I paste the whole image. Then I place polythene on top of decoupaged image and press it from inward to outword direction to remove air bubbles. I decoupage the image on the other side of the bucket. I leave it to dry and then I seal the image with one coat of Mod Podge.

Now it is time to do some color blending around the image. Color combination plays an important role in decoupage always choose colors very carefully. Select colors in combination with your image. Chalk paints gives better finish in color blending. Always use lighter shade of color around the image because darker shades could suppress the beauty of the image. I have done color blending using sponge dauber. I wanted to give vintage look to my project so I have decided to give it a crackle effect. I have used 2 step crackle medium, which comes in set of two bottles- base coat and top coat. 2 step crackle medium works on any type of surface. Here patience is the key. Let crackle medium dry naturally. Do not use any heat dryer or heat tool to speed up the drying process. I apply base coat of crackle medium with the help of synthetic brush. I always apply less quantity of medium on top of image. I left it to dry naturally on its own. It takes few hours to dry, depending upon room temperature. When it got dried I apply top coat of crackle medium. Always keep the direction of the brush same while applying both the mediums. I have applied thick coat of top coat in the same manner. I let it dry. Top coat also takes few hours to dry. When I am satisfied that top coat has dried properly, then I use oil color to highlight the cracks. Take out a small quantity of oil color on a small piece of dry cloth and rub gently and wipe it with another piece of cloth. Complete the whole surface like this, gradually rubbing the oil color and wiping off the exccess oil color. As you wipe the oil color, you will see the beautiful cracks appearing and creating a vintage look. You can use metallic wax also to enhance the cracks. Our beautiful bucket with vintage look is ready to adorn the house. There is not much need to apply varnish since we have already sealed the tissue and we have used oil color also.

I have received two such buckets and beautiful Calambour decoupage rice paper in my Guest DT kit so I have decided to use that paper on the second bucket. The peacocks looks perfect for the bucket so I have done fussy cutting. I will use rest of paper on my another project. On this bucket also I have created white base using one coat of gesso and second coat of Folk Art chalk paint. Then I see the placement of image and using Mod Podge Matte I pasted images of peacocks facing each other. I leave to dry and then seal the image with a coat of Mod Podge. I have decided to create some background texture and for that I have used egg shells. You can create texture with the help of modelling paste or texture paste using any background stencil. I have pasted egg shells using modpodge. This is creating a brick wall effect and perfectly going with the images also.

I left it to dry. Now its time to do some color blending. On this project also I have used chalk paint. Around the image I have used sponge dauber but while doing color blending I have used flat brush on the textured surface. I wanted to enhance that background texture so I have decided to use Inka Gold for the purpose. Any type of metallic wax can be used. I have used copper and gold colors of Inka Gold. I have rubbed wax with my finger to achieve that desired look. I let it dry for sometime and then finally seal the whole bucket with Aquadur PU of Asain Paints.

A beautiful bucket is ready to adorn your house. It is said that Happiness is Handmade. So create with your own hands, something unique and beautiful and spread happiness. Get these buckets for yourself and decorate your lovely home with your handmade creations. Do not forget to share your lovely creations with all of us.

About The Artist

Vidhu Thareja is a crafter from Noida, born and brought up in Delh. She had completed her studies from Delhi. She began her career as a freelance translator and worked with many reputed publications. She has also worked in the Insurance Sector for many years.

Due to personal reasons she had to give up her job, which actually turned out to be a blessing in disguise. The turning poing came when she got the golden opportunity to work with Madura Coats Pvt. Ltd. as a Craft Consultant for their Anchor Thread Craft activities in reputed schools of Delhi/ NCR Region. Although it was not a very high paying job it gave her all the confidence and a feeling of fulfillment, which made her realize the crafter hidden in her.

Since her childhood she was very much interested in crafts. Growing up, there was not that much exposure to tv or computer and she used to do embroidery in her free time or during vacations. Her biggest inspiration was her mother who is her motivating force. At the time of conducting Anchor thread craft workshops, she started doing DIY activities and decided to learn more.

From then there was no looking back and today she is doing what she loves to do. Although every new technique and art form attracts her but Decoupage and Sospeso are the two crafts, that she enjoys the most. She never lost a chance to learn anything new because she believes that learning never stops.

She follows her fellow crafters because she feels every person teaches you something. To all upcoming crafters she has this to say “That whatever you do, do it with love and passion, follow others but make your own style statement. Be confident but never be over-confident. Share your knowledge, that is what makes you grow”.

You can follow Vidhu Thareja on her Facebook and Instagram on the below mentioned links…

Vidhu’s Crafts – Making Crafts From Heart

//www.instagram.com/vidhus_craft_handmade/

//www.facebook.com/Vidhus-Crafts-Making-Crafts-From-Heart-553637291368517/

Continue reading...
Decoupage On Metal Bucket by Vidhu Thareja
  • /
  • 695 Views
  • /

Hello everyone, Vidhu Thareja here once again on the blog of Connect4Sale with new projects to share with all the craft lovers. First of all I want to thank Connect4Sale for giving me this wonderful opportunity to be a guest DT.

Today I am sharing step wise picture tutorial of altered white metal buckets, recently introduced by Connect4Sale. These buckest can be turned into beautiful home décor piece using decoupage, doodle art, mixed media. They can be used on tables, as wall hangings, kitchen décor or return favours; possibilities are endless.


I personally love doing decoupage so when I received two buckets in my guest DT kit, I decided to alter them with two different techniques. So lets start…..

My first project is image transfer. These days image transfer techniques is getting very popular. You can personalize anything with this technique. Since I was using black and white image, so I decided to keep my base white. If you want to color the base, use any light shade of chalk paint. First I had applied 2 coats Folk Art white chalk paint with the help of sponge. I let it dry completely. I have Stamperia Image transfer sheets in my stash, which I had received from Connect4Sale in my guest DT kit.

These sheets come in the set of two co-ordinating sheets. I have used one image from the set. I have done fussy cutting of the image, as close to the outline of the image. This is a very exciting technique, all you need is patience. I have used Modpodge Matte in this project, also available at Connect4Sale. I have applied sufficient amount of Mod Podge on the printed side of the paper, which we will paste face down. Apply modpodge evenly to cover the whole image. I have applied Mod Podge on that area of bucket, where I was going to paste the image. So mark the area, where you need to paste the image. If you are doing image transfer directly on the surface, without any base coat, then apply Mod Podge only on image.

I slowly placed the image on the surface and pressed it gently with hand to ensure that there would be no air bubble. Smooth the image from inward to outward direction. Then leave it to dry for atleast 12 hours or so.

Now it is turn to remove layers from the image. Be gentle here. Wet your fingers and start rubbing the paper in circular motions. Remember here we need to remove layer by layer. Start from one end and complete the whole image. Keeps on removing the paper, until you see the final image. When you are satisfied that the image got transferred, seal it with one coat of Mod Podge. I wanted to enhance the look of the bucket so I have applied black chalk paint on the rim and at the bottom of the bucket. It is advisable to use chalk paint on the surface like metal because acrylic color will not adhere properly and will start peeling off. Folk Art And ICraft chalk paints are available at Connect4Sale.

On the area where I have applied black paint, I have done some dry brushing with silver metallic color. The bucket was looking little plain to me so have done some stamping using script stamp with Black Archival Ink. Archival ink are permanent inks, which do not react with water based glue, varnish etc. This script stamp is in perfect combination with my image. Finally I have applied a final coat of water based varnish – Aquadur PU of Asain Paints. A beautiful décor piece is ready.

On the second bucket I decided to do decoupage using Stamperia rice paper, which I have received in my guest DT kit. It is an awesome product to use. You will get a variety of designs in rice paper, available at Connect4Sale. Since the bucket is small in size and rice paper has different images, so I decided to use two coordinating images. I have used wet brush technique for better blending of image with the base.

Take a zero number round brush and wet the bristles and remove the image from a distance using the wet brush. I avoided using scissors for such projects where I need to blend the image. Scissors give crisp edges which we do not require. I have applied two coats of folk art white chalk paint with the help of sponge dauber. It gives even coverage. I let it dry. Then I see the placement of images on the bucket. It is very important to see the placement of images, before pasting it. Rice paper is used in same way, like we use tissue. The only difference is that rice paper is not thin as tissue. Now I place first image on bucket and paste it, using Mod Podge Matte. Then I decoupage the second image also. I leave it to dry for few minutes.

Now it is turn to blend some colors in combination to image. We need to seal the image with glue so it is always better to seal the image before color blending.I decided to use off white, green and blue shades of chalk paint. Here I want to repeat that for metal and glass like non porus surface, always use chalk paints. I always use sponge dauber to blend the colors. Always use lighter shades around the image and use dark shades gradually. I have used the same sponge to blend all the three colors simultaneously. I have done some dry brushing with copper and golden metallic color on the rim and handle of the bucket. On this bucket also, I have done some stamping with green and black archival inks. Different type of clear stamps are available at Connect4Sale to choose from. In the center I have used a sentiment stamp.

These sentiments stamps gives more meaning to our creations. Now it is time to seal the project with clear varnish. I have used Aquadur PU varnish. Always apply multiple coats of varnish to make your projects long lasting. A beautiful home décor piece is ready to adorn your home. It is so much fun to create something for our home. So what are you waiting for…create something unique to decorate your lovely home. Do not forget to share your beautiful creations with all of us.

About The Artist

Vidhu Thareja is a crafter from Noida, born and brought up in Delh. She had completed her studies from Delhi. She began her career as a freelance translator and worked with many reputed publications. She has also worked in the Insurance Sector for many years.

Due to personal reasons she had to give up her job, which actually turned out to be a blessing in disguise. The turning poing came when she got the golden opportunity to work with Madura Coats Pvt. Ltd. as a Craft Consultant for their Anchor Thread Craft activities in reputed schools of Delhi/ NCR Region. Although it was not a very high paying job it gave her all the confidence and a feeling of fulfillment, which made her realize the crafter hidden in her.

Since her childhood she was very much interested in crafts. Growing up, there was not that much exposure to tv or computer and she used to do embroidery in her free time or during vacations. Her biggest inspiration was her mother who is her motivating force. At the time of conducting Anchor thread craft workshops, she started doing DIY activities and decided to learn more.

From then there was no looking back and today she is doing what she loves to do. Although every new technique and art form attracts her but Decoupage and Sospeso are the two crafts, that she enjoys the most. She never lost a chance to learn anything new because she believes that learning never stops.

She follows her fellow crafters because she feels every person teaches you something. To all upcoming crafters she has this to say “That whatever you do, do it with love and passion, follow others but make your own style statement. Be confident but never be over-confident. Share your knowledge, that is what makes you grow”.

You can follow Vidhu Thareja on her Facebook and Instagram on the below mentioned links…

Vidhu’s Crafts – Making Crafts From Heart

//www.instagram.com/vidhus_craft_handmade/

//www.facebook.com/Vidhus-Crafts-Making-Crafts-From-Heart-553637291368517/
Continue reading...